Optical properties of transparent polycrystalline ruby (Cr:Al2O3) fabricated by high-pressure spark plasma sintering

Doped transparent ceramics with high optical quality can serve as materials for photonic applications such as laser gain media. In that regard, transparent polycrystalline alumina has potential for high-power applications due to its excellent physical and chemical properties, combined with unique doping possibilities. However, optical birefringence of Al₂O₃ crystals make achieving sufficiently high optical transmittance a processing challenge. In the present study, we demonstrated fabrication of highly transparent 0.5 at.% Cr:Al₂O₃ ceramics by high-pressure spark plasma sintering (HPSPS). The optical properties of these polycrystalline ruby ceramics were analyzed in order to assess possible laser operation (at 694.3 nm). The obtained ceramics exhibit high in-line transmittance (～72.5 % at 700 nm), equivalent to a scattering coefficient of 2.15 cm^?1, and characteristic ruby photoluminescence. The theoretically estimated lasing threshold and percentage of absorbed pump power indicate that such ruby ceramic lasers could operate at reasonable thresholds of 80?225 mW with short lengths of 0.5?5 mm. Thus, HPSPS is a promising method for producing laser-quality doped transparent ceramics for compact laser systems.     

采用信息增益率的混合入侵检测模型设计

针对现有混合入侵检测模型仅定性选取特征而导致检测精度较低的问题，同时为了充分结合误用检测模型和异常检测模型的优势，提出一种采用信息增益率的混合入侵检测模型.首先，利用信息增益率定量地选择特征子集，最大程度地保留样本信息；其次，采用余弦时变粒子群算法确定支持向量机参数构建误用检测模型，使其更好地平衡粒子在全局和局部的搜索能力，然后，选取灰狼算法确定单类支持向量机参数构建异常检测模型，以此来提高对最优参数的搜索效率和精细程度，综合提高混合入侵检测模型对攻击的检测效果；最后，通过两种数据集进行仿真实验，验证了所提混合入侵检测模型具有较好的检测性能.     

Effect of cyclotron resonance on ‘hot’ dispersion in a staggered double metallic grating sheet beam travelling wave tube

Based on the beam wave synchronous interaction in transverse and longitudinal directions at the same time and starting from Maxwell’s equation and linear Vlasov equation, the beam–wave interaction ‘hot’ dispersion equation considering both cyclotron resonance and Cherenkov resonance in a staggered double metallic grating traveling wave tube is deduced. Through the reasonable selection for geometric and electrical parameters, the numerical calculation and analysis of the ‘hot’ dispersion equation shows that the beam–wave interaction gain and frequency band with the cyclotron resonance enhancement effect are higher than those with only Cherenkov resonance radiation.     

Compressive strength and microstructure of alkali-activated fly ash/slag binders at high temperature

This paper reports the results of the compressive strength and microstructure of various alkali-activated binders at elevated temperatures of 300 and 600 °C. The binders were prepared by alkali-activated low calcium fly ash/ground granulated blast-furnace slag at ratios of 100/0, 50/50, 10/90 and 0/100 wt.%. Specimens free of loading were heated to a pre-fixed temperature by keeping the furnace temperature constant until the specimens reached a steady state. Then the specimen was loaded to failure while hot. XRD, SEM and FTIR techniques were used to investigate the microstructural changes after the thermal exposure. The fly ash-based specimen shows an increase in strength at 600 °C. On the other hand, the slag-based specimen gives the worst high-temperature performance particularly at a temperature of 300 °C as compared to ordinary Portland cement binder. This contrasting behaviour of binders is due to their different binder formulation which gives rise to various phase transformations at elevated temperatures. The effects of these transformations on the compressive strength are discussed on the basis of experimental results.     

The optical spectra characterization of Cr2+:ZnSe polycrystalline synthesized by direct reaction of Zn–Cr alloy and element Se

Cr²⁺:ZnSe materials have attracted much attention as candidates for mid-infrared laser source either in the form of polycrystalline powders, or bulk ceramics, single crystals and nano-materials. In this work, a novel method for synthesizing Cr²⁺:ZnSe polycrystalline by direct reaction of Zn–Cr alloy and element Se (DRAE) was proposed. The zinc alloy containing 0.1 at% Cr was prepared by dissolving Cr in zinc liquid in a closed quartz ampoule. X-ray diffraction (XRD) results showed that the synthesized Cr²⁺:ZnSe polycrystalline was with a Zinc-blend structure. X-ray photoelectron spectroscopy (XPS) spectra showed that there was no un-reacted element of Zn, or Se. Cr²⁺ ions successfully and uniformly doped into ZnSe crystal lattice, which is confirmed by the diffuse reflectance spectrum, Raman spectrum and mid-infrared photoluminescence spectra. Furthermore, the sample showed excellent mid-infrared properties without luminescence quenching in the region 1800–3000 nm, and the decay-time was about 5 μs. The as-synthesized Cr²⁺:ZnSe polycrystalline meets the requirement for the preparation of mid-infrared ceramic or single crystals. These results indicate that the novel strategy of DRAE is valid for the synthesis of other transition metal doped ZnSe materials.     

An analytical model for optimizing the performance of graphene based silicon Schottky barrier solar cells

In this paper, a model taking into account the effects of carrier loss mechanisms has been developed. The model simulates the photovoltaic properties of the graphene/n-type silicon Schottky barrier solar cells (G/n-Si_SBSC), and it can reproduce the experimentally determined parameters of the G/n-Si_SBSC. To overcome the low efficiencies of G/n-Si_SBSC, their performances have been optimized by modifying the work function of graphene and Si properties, accounted for variation of its thickness and doping level. The obtained results show that the work function of graphene has the major impact on the device performance. Also, the temperature dependence of the G/n-Si_SBSC performance is investigated.     

Co-existing of dressed non-linear gain and electromagnetically induced absorption

The dressed parametric four-wave mixing (FWM) process has been investigated in hot atomic rubidium vapor. We use a strong pumping field to generate entangled photon pairs of spontaneous parametric FWM (SP-FWM) which can be enhanced by an external dressing effect. Seeding probe beam into the Stokes or anti-Stokes (SP-FWM) channel will form the parametric amplified FWM (PA-FWM) process, then the non-linear gain and electromagnetically induced absorption (EIA) are observed, caused by the internal dressing effect. However, with scanning of pumping field the absorbing background will vanish, which will result in drastic increase in PA-FWM signal gain.